Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating
It is well known that cold spraying ceramic materials can be difficult because cold spraying requires plastic deformation of the feedstock particles for adhesion to the substrate. The challenge lies in the difficulty of plastically deforming hard and brittle ceramic materials, such as TiO2. Previous...
Guardado en:
| Autores principales: | , , , |
|---|---|
| Formato: | Capítulo de libro |
| Lenguaje: | inglés |
| Publicado: |
IntechOpen
2020
|
| Materias: | |
| Acceso en línea: | https://www.intechopen.com/chapters/73621 |
| Etiquetas: |
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1879164727307796480 |
|---|---|
| author | Omar, Noor Irinah Yamada, Motohiro Yasui, Toshiaki Fukumoto, Masahiro |
| author_browse | Fukumoto, Masahiro Omar, Noor Irinah Yamada, Motohiro Yasui, Toshiaki |
| author_facet | Omar, Noor Irinah Yamada, Motohiro Yasui, Toshiaki Fukumoto, Masahiro |
| author_sort | Omar, Noor Irinah |
| building | IntechOpen |
| collection | Acceso abierto |
| description | It is well known that cold spraying ceramic materials can be difficult because cold spraying requires plastic deformation of the feedstock particles for adhesion to the substrate. The challenge lies in the difficulty of plastically deforming hard and brittle ceramic materials, such as TiO2. Previous studies have reported the possibility of cold spraying thick pure TiO2 but the bonding mechanism of cold sprayed TiO2 is not fully understood. The factor like substrate condition as oxide film thickness and mechanical properties may also affect cold spray deposition but not fully understood in cold spraying ceramic. The aim of the present research is to investigate the correlation between the oxide thickness and substrate deformation with the adhesion strength of cold-sprayed TiO2 coatings toward the bonding mechanism involved. Relevant experiments were executed using Al 1050, subjected to various annealing temperatures and cold-sprayed with TiO2 powder. The results indicate a decreasing trend of coating adhesion strength with increasing annealed substrate temperature from room temperature to 400°C annealed. Metallurgical bonding is pronounced as bonding mechanism involved between TiO2 particle and annealed 1050 substrate. |
| doi_str_mv | 10.5772/intechopen.94097 |
| first_indexed | 2026-10-15T21:38:55Z |
| format | Book Chapter |
| fullrecord | <oai_dc:dc xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd"><identifier>intech-73621</identifier><datestamp>2020-10-15</datestamp>
<dc:title>Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating</dc:title>
<dc:creator>Noor Irinah Omar</dc:creator>
<dc:creator>Motohiro Yamada</dc:creator>
<dc:creator>Toshiaki Yasui</dc:creator>
<dc:creator>Masahiro Fukumoto</dc:creator>
<dc:subject>Physical Sciences, Engineering and Technology</dc:subject>
<dc:description>It is well known that cold spraying ceramic materials can be difficult because cold spraying requires plastic deformation of the feedstock particles for adhesion to the substrate. The challenge lies in the difficulty of plastically deforming hard and brittle ceramic materials, such as TiO2. Previous studies have reported the possibility of cold spraying thick pure TiO2 but the bonding mechanism of cold sprayed TiO2 is not fully understood. The factor like substrate condition as oxide film thickness and mechanical properties may also affect cold spray deposition but not fully understood in cold spraying ceramic. The aim of the present research is to investigate the correlation between the oxide thickness and substrate deformation with the adhesion strength of cold-sprayed TiO2 coatings toward the bonding mechanism involved. Relevant experiments were executed using Al 1050, subjected to various annealing temperatures and cold-sprayed with TiO2 powder. The results indicate a decreasing trend of coating adhesion strength with increasing annealed substrate temperature from room temperature to 400°C annealed. Metallurgical bonding is pronounced as bonding mechanism involved between TiO2 particle and annealed 1050 substrate.</dc:description>
<dc:publisher>IntechOpen</dc:publisher>
<dc:date>2020-10-15</dc:date>
<dc:type>Chapter, Part Of Book</dc:type>
<dc:identifier>https://www.intechopen.com/chapters/73621</dc:identifier>
<dc:identifier>doi:10.5772/intechopen.94097</dc:identifier>
<dc:language>en</dc:language>
<dc:relation>ISBN:978-1-83962-956-3</dc:relation>
<dc:rights>https://creativecommons.org/licenses/by/3.0/</dc:rights>
<dc:source>https://www.intechopen.com/books/10055 ; Material Flow Analysis</dc:source>
</oai_dc:dc> |
| id | intech-73621 |
| institution | IntechOpen |
| isbn | 978-1-83962-956-3 |
| language | English |
| last_indexed | 2026-10-15T21:38:55Z |
| publishDate | 2020 |
| publishDateRange | 2020 |
| publishDateSort | 2020 |
| publisher | IntechOpen |
| publisherStr | IntechOpen |
| record_format | oai_dc |
| spelling | intech-736212020-10-15 Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating Noor Irinah Omar Motohiro Yamada Toshiaki Yasui Masahiro Fukumoto Physical Sciences, Engineering and Technology It is well known that cold spraying ceramic materials can be difficult because cold spraying requires plastic deformation of the feedstock particles for adhesion to the substrate. The challenge lies in the difficulty of plastically deforming hard and brittle ceramic materials, such as TiO2. Previous studies have reported the possibility of cold spraying thick pure TiO2 but the bonding mechanism of cold sprayed TiO2 is not fully understood. The factor like substrate condition as oxide film thickness and mechanical properties may also affect cold spray deposition but not fully understood in cold spraying ceramic. The aim of the present research is to investigate the correlation between the oxide thickness and substrate deformation with the adhesion strength of cold-sprayed TiO2 coatings toward the bonding mechanism involved. Relevant experiments were executed using Al 1050, subjected to various annealing temperatures and cold-sprayed with TiO2 powder. The results indicate a decreasing trend of coating adhesion strength with increasing annealed substrate temperature from room temperature to 400°C annealed. Metallurgical bonding is pronounced as bonding mechanism involved between TiO2 particle and annealed 1050 substrate. IntechOpen 2020-10-15 Chapter, Part Of Book https://www.intechopen.com/chapters/73621 doi:10.5772/intechopen.94097 en ISBN:978-1-83962-956-3 https://creativecommons.org/licenses/by/3.0/ https://www.intechopen.com/books/10055 ; Material Flow Analysis |
| spellingShingle | Physical Sciences, Engineering and Technology Omar, Noor Irinah Yamada, Motohiro Yasui, Toshiaki Fukumoto, Masahiro Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating |
| title | Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating |
| title_full | Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating |
| title_fullStr | Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating |
| title_full_unstemmed | Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating |
| title_short | Influence of Annealed Aluminum Properties on Adhesion Bonding of Cold Sprayed Titanium Dioxide Coating |
| title_sort | influence of annealed aluminum properties on adhesion bonding of cold sprayed titanium dioxide coating |
| topic | Physical Sciences, Engineering and Technology |
| url | https://www.intechopen.com/chapters/73621 |
| work_keys_str_mv | AT omarnooririnah influenceofannealedaluminumpropertiesonadhesionbondingofcoldsprayedtitaniumdioxidecoating AT yamadamotohiro influenceofannealedaluminumpropertiesonadhesionbondingofcoldsprayedtitaniumdioxidecoating AT yasuitoshiaki influenceofannealedaluminumpropertiesonadhesionbondingofcoldsprayedtitaniumdioxidecoating AT fukumotomasahiro influenceofannealedaluminumpropertiesonadhesionbondingofcoldsprayedtitaniumdioxidecoating |