Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts
This study optimized the influence of process parameters on the mechanical properties during injection molding (IM) of PC/ABS blend. The Taguchi method of design of experiments (DOE) was employed to optimize the process parameters and to increase the tensile strength and the elasticity module. Taguc...
Guardado en:
| Autores principales: | , |
|---|---|
| Formato: | Capítulo de libro |
| Lenguaje: | inglés |
| Publicado: |
IntechOpen
2020
|
| Materias: | |
| Acceso en línea: | https://www.intechopen.com/chapters/74331 |
| Etiquetas: |
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1879164723304333312 |
|---|---|
| author | Hentati, Fatma Masmoudi, Neila |
| author_browse | Hentati, Fatma Masmoudi, Neila |
| author_facet | Hentati, Fatma Masmoudi, Neila |
| author_sort | Hentati, Fatma |
| building | IntechOpen |
| collection | Acceso abierto |
| description | This study optimized the influence of process parameters on the mechanical properties during injection molding (IM) of PC/ABS blend. The Taguchi method of design of experiments (DOE) was employed to optimize the process parameters and to increase the tensile strength and the elasticity module. Taguchi’s L9 (34) orthogonal array design was employed for the experimental plan. Process parameters of the injection molding such as material temperature, injection pressure, holding time, and mold temperature were studied with three levels. The Signal to noise (S/N) ratio for mechanical properties of PC/ABS blend using the Taguchi method was calculated. Taguchi’s results proposed two sets of optimal injection parameters conditions to achieve the best mechanical characteristics (σ, E). The (S/N) ratio results proved that the injection pressure was the more prominent than the other IM process parameters for the tensile strength, and the material temperature was the more prominent for the elasticity module. |
| doi_str_mv | 10.5772/intechopen.95089 |
| first_indexed | 2026-10-15T21:38:52Z |
| format | Book Chapter |
| fullrecord | <oai_dc:dc xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd"><identifier>intech-74331</identifier><datestamp>2020-12-07</datestamp>
<dc:title>Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts</dc:title>
<dc:creator>Fatma Hentati</dc:creator>
<dc:creator>Neila Masmoudi</dc:creator>
<dc:subject>Physical Sciences, Engineering and Technology</dc:subject>
<dc:description>This study optimized the influence of process parameters on the mechanical properties during injection molding (IM) of PC/ABS blend. The Taguchi method of design of experiments (DOE) was employed to optimize the process parameters and to increase the tensile strength and the elasticity module. Taguchi’s L9 (34) orthogonal array design was employed for the experimental plan. Process parameters of the injection molding such as material temperature, injection pressure, holding time, and mold temperature were studied with three levels. The Signal to noise (S/N) ratio for mechanical properties of PC/ABS blend using the Taguchi method was calculated. Taguchi’s results proposed two sets of optimal injection parameters conditions to achieve the best mechanical characteristics (σ, E). The (S/N) ratio results proved that the injection pressure was the more prominent than the other IM process parameters for the tensile strength, and the material temperature was the more prominent for the elasticity module.</dc:description>
<dc:publisher>IntechOpen</dc:publisher>
<dc:date>2020-12-07</dc:date>
<dc:type>Chapter, Part Of Book</dc:type>
<dc:identifier>https://www.intechopen.com/chapters/74331</dc:identifier>
<dc:identifier>doi:10.5772/intechopen.95089</dc:identifier>
<dc:language>en</dc:language>
<dc:relation>ISBN:978-1-83962-497-1</dc:relation>
<dc:rights>https://creativecommons.org/licenses/by/3.0/</dc:rights>
<dc:source>https://www.intechopen.com/books/9925 ; Quality Control - Intelligent Manufacturing, Robust Design and Charts</dc:source>
</oai_dc:dc> |
| id | intech-74331 |
| institution | IntechOpen |
| isbn | 978-1-83962-497-1 |
| language | English |
| last_indexed | 2026-10-15T21:38:52Z |
| publishDate | 2020 |
| publishDateRange | 2020 |
| publishDateSort | 2020 |
| publisher | IntechOpen |
| publisherStr | IntechOpen |
| record_format | oai_dc |
| spelling | intech-743312020-12-07 Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts Fatma Hentati Neila Masmoudi Physical Sciences, Engineering and Technology This study optimized the influence of process parameters on the mechanical properties during injection molding (IM) of PC/ABS blend. The Taguchi method of design of experiments (DOE) was employed to optimize the process parameters and to increase the tensile strength and the elasticity module. Taguchi’s L9 (34) orthogonal array design was employed for the experimental plan. Process parameters of the injection molding such as material temperature, injection pressure, holding time, and mold temperature were studied with three levels. The Signal to noise (S/N) ratio for mechanical properties of PC/ABS blend using the Taguchi method was calculated. Taguchi’s results proposed two sets of optimal injection parameters conditions to achieve the best mechanical characteristics (σ, E). The (S/N) ratio results proved that the injection pressure was the more prominent than the other IM process parameters for the tensile strength, and the material temperature was the more prominent for the elasticity module. IntechOpen 2020-12-07 Chapter, Part Of Book https://www.intechopen.com/chapters/74331 doi:10.5772/intechopen.95089 en ISBN:978-1-83962-497-1 https://creativecommons.org/licenses/by/3.0/ https://www.intechopen.com/books/9925 ; Quality Control - Intelligent Manufacturing, Robust Design and Charts |
| spellingShingle | Physical Sciences, Engineering and Technology Hentati, Fatma Masmoudi, Neila Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts |
| title | Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts |
| title_full | Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts |
| title_fullStr | Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts |
| title_full_unstemmed | Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts |
| title_short | Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts |
| title_sort | influence of injection molding parameters on the mechanical properties of injected pc abs parts |
| topic | Physical Sciences, Engineering and Technology |
| url | https://www.intechopen.com/chapters/74331 |
| work_keys_str_mv | AT hentatifatma influenceofinjectionmoldingparametersonthemechanicalpropertiesofinjectedpcabsparts AT masmoudineila influenceofinjectionmoldingparametersonthemechanicalpropertiesofinjectedpcabsparts |