Treatment of Textile Dyeing Waste Water Using TiO<sub>2</sub>/Zn Electrode by Spray Pyrolysis in Electrocoagulation Process
An alternative form of treatment for the remediation of textile waste water, electrocoagulation (EC) methods are used. This work deals mainly with the treatment of waste water for textile dyeing preceded by the use of wastewater. The goal of the proposed study is to evaluate the efficiency of the el...
Guardado en:
| Autor principal: | |
|---|---|
| Formato: | Capítulo de libro |
| Lenguaje: | inglés |
| Publicado: |
IntechOpen
2021
|
| Materias: | |
| Acceso en línea: | https://www.intechopen.com/chapters/74730 |
| Etiquetas: |
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | An alternative form of treatment for the remediation of textile waste water, electrocoagulation (EC) methods are used. This work deals mainly with the treatment of waste water for textile dyeing preceded by the use of wastewater. The goal of the proposed study is to evaluate the efficiency of the electrocoagulation process using TiO2/Zn electrodes using TiCl3 via spray pyrolysis. The surface morphology of the electrode was studied by SEM, XRD and EDS analysis. The efficiency of electrocoagulation treatment process to treat synthetic waste water containing Coralene Navy RDRLSR, Coralene Red 3G, Rubru RD GLFI dye was studied. The effect of parameters such as current density, influence of effluent pH, supporting electrolyte NaCl concentration, and EC time on dye removal efficiency were investigated. The result indicates that this process is very efficient and was able to achieve color removal (99.5%) at pH 8.5 and 0.15 A in 10 minutes. |
|---|---|
| ISBN: | 978-1-83968-614-6 |
| DOI: | 10.5772/intechopen.95325 |