Investigation of Zn/Ni-Based Electrocatalysts for Electrochemical Conversion of CO<sub>2</sub> to SYNGAS
In the last decade, there is some research on the conversion of CO2 to energy form. CO2 can be converted to value-added chemicals including HCOOH, CO, CH4, C2H4, and liquid hydrocarbons that can be used in various industries. Among the methods, electrochemical methods are of concern regarding their...
Guardado en:
| Autores principales: | , , , |
|---|---|
| Formato: | Capítulo de libro |
| Lenguaje: | inglés |
| Publicado: |
IntechOpen
2021
|
| Materias: | |
| Acceso en línea: | https://www.intechopen.com/chapters/74764 |
| Etiquetas: |
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | In the last decade, there is some research on the conversion of CO2 to energy form. CO2 can be converted to value-added chemicals including HCOOH, CO, CH4, C2H4, and liquid hydrocarbons that can be used in various industries. Among the methods, electrochemical methods are of concern regarding their capability to operate with an acceptable reaction rate and great efficiency at room temperature and can be easily coupled with renewable energy sources. Besides, electrochemical cell devices have been manufactured in a variety of sizes, from portable to large-scale applications. Catalysts that optionally reduce CO2 at low potential are required. Therefore, choosing a suitable electrocatalyst is very important. This chapter focused on the electrochemical reduction of CO2 by Zn-Ni bimetallic electrocatalyst. The Zn-Ni coatings were deposited on the low-carbon steel substrate. Electrochemical deposition parameters such as temperature in terms of LPR corrosion rate, microstructure, microcracks, and its composition have been investigated. Then, the electrocatalyst stability and activity, as well as gas intensity and selectivity, were inspected by SEM/EDX analysis, GC, and electrochemical tests. Among the electrocatalysts for CO2 reduction reaction, the Zn65%-Ni35% electrode with cluster-like microstructure had the best performance for CO2 reduction reaction according to minimum coke formation (<10%) and optimum CO and H2 faradaic efficiencies (CO FE% = 55% and H2 FE% = 45%). |
|---|---|
| ISBN: | 978-1-83968-127-1 |
| DOI: | 10.5772/intechopen.95626 |