Modeling of LPBF Scanning Strategy and its Correlation with the Metallic 316 L, 321, and Alnico Magnets Samples Structure
This chapter presents the influence of powder bed laser scanning strategy on the crystallographic structure of the fused specimens 316 L, 321 stainless steel, and Alnico magnets. The main parameters affecting structure are as follows—laser power, stripe width, number of repeated passes with differen...
Guardado en:
| Autores principales: | , , , , , |
|---|---|
| Formato: | Capítulo de libro |
| Lenguaje: | inglés |
| Publicado: |
IntechOpen
2022
|
| Materias: | |
| Acceso en línea: | https://www.intechopen.com/chapters/80282 |
| Etiquetas: |
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This chapter presents the influence of powder bed laser scanning strategy on the crystallographic structure of the fused specimens 316 L, 321 stainless steel, and Alnico magnets. The main parameters affecting structure are as follows—laser power, stripe width, number of repeated passes with different power, and type of scanning (circle, bidirectional or interlaced, etc.). Changes in the crystallographic structure are studied with regard to melt pool geometry, surface temperature, and surface heat transfer. The correlation is shown between stripe width and laser beam focal spot diameter. Depending on the ratio between stripe width and laser beam focal spot diameter one can see growth elongated and oriented grains or quasi-equiaxed non-oriented grains. The influence of the energy input on the melt pool size and the microstructure of the sample is studied. The influence of the scanning mode (bidirectional and circular) on the temperature distribution in the sample and the microstructure of the sample made of Alnico alloy is considered. All these experimental and model examples clearly demonstrate that it is possible to produce a controllable structure during LPBF process building for advanced additive manufacturing. |
|---|---|
| ISBN: | 978-1-83962-820-7 |
| DOI: | 10.5772/intechopen.102073 |