Dependence of Corrosion Resistance of Austenitic Chromium-Nickel Steels on the Magnetic State of Austenite
Corrosive behavior of austenitic chromium-nickel steels from the magnetic state (parameter χ0) of austenite, pre-formed to interact with aggressive media are research. Correlation between the rate K of pitting corrosion and the specific magnetic susceptibility χ0 of austenite was experimentally esta...
Saved in:
| Main Author: | |
|---|---|
| Format: | Book Chapter |
| Language: | English |
| Published: |
IntechOpen
2022
|
| Subjects: | |
| Online Access: | https://www.intechopen.com/chapters/80664 |
| Tags: |
No Tags, Be the first to tag this record!
|
| Summary: | Corrosive behavior of austenitic chromium-nickel steels from the magnetic state (parameter χ0) of austenite, pre-formed to interact with aggressive media are research. Correlation between the rate K of pitting corrosion and the specific magnetic susceptibility χ0 of austenite was experimentally established. It is experimentally established that the corrosion resistance of austenitic steels AISI304, 08Cr18Ni10, AISI 321, 08Cr18Ni10Тi (containing a low amount of δ-ferrite ∼0.005…0.5%) depends on the magnetic state of austenite: the corrosion rate of steel decreases with increases χ0 austenite. The tendency of change in the corrosion rate of austenitic alloy with a high nickel content 06Crh28NiMoCuTi (not contain δ-ferrite) has the opposite character: with increasing χ0, the corrosion rate of the alloy increases is revealed. For austenitic chromium-nickel steels, the corrosion rates of the individual (austenite (A), δ-ferrite (F), strain-induced α′-martensite (M)) and total (A + F, A + M and A + F + M) phases are determined. It is proposed to predict corrosion according to the specific magnetic susceptibility χ0 of austenite and the amount δ-ferrite. |
|---|---|
| ISBN: | 978-1-80355-132-6 |
| DOI: | 10.5772/intechopen.102388 |